Characteristic:
More firm,mork light,quick dry.

Applicant Range:Orthopedic, Fracture and Shape mould.

 

Operation:
1.Put one roll bandage into the tepid water approx 15 seconds,take it out and drip the excess water but don’t squeeze it.
2.Wrap the affected part with bandage one by one in the way of foling mutally in wind and spiral,two layer fold half to 2/3(while wrapping should be tight)
3.After wrapping before shaping operator should paint some grease in order to prevent adhesive.Then shaping the mould and be finished within 3min-6min.
4. It’s about 10 min after shaping the mould can be very hard,30min passed,the mould cal bear weight.
5.The tube mould can open hole while removing,it must be cut by scalpel or electric saw for palster.

 

Note:
1. Placing cast padding inside first.
2.Before using must wrap lining;operator must wear the emulsion gloves.
3.One-off product.

 

Sizes:

 

Width (CM)	Length (CM)
7.5	30/88
10	38/76
12.5	76/114
15	76/114

Package: each in a a aluminum pack